|
测试电流 AC 3A ~ 32A
--------------------------------------------------------------------------------
测试电压 最大 8V AC Typically
--------------------------------------------------------------------------------
量测阻抗范围 0 to 0.12W, 0 to 0.6W 共 2 档
--------------------------------------------------------------------------------
量测准确度 3A ~ 5A, +10% 满刻度
5A ~ 32A, +5% 满刻度
--------------------------------------------------------------------------------
电流表 显示测试电流及警告设限值
--------------------------------------------------------------------------------
阻抗表 显示测试电阻及 Fail 与 SUBTRACTION 设定值
--------------------------------------------------------------------------------
切换开关 Zero-start operating switch
--------------------------------------------------------------------------------
计时器 1S, 10S, 1MIN, 10MIN 共 4 档
--------------------------------------------------------------------------------
警告 Monitor the variation test current, when the test current is beyond+10% of
the setting value, the warning operation will proceed.
警告设定范围 3A ~ 32A
--------------------------------------------------------------------------------
SUBTRACTION The resistance of testing line can be subtracted from the test
value
The subtraction range from 0 ~ 0.1W
准确度 +10%
--------------------------------------------------------------------------------
GO-NOGO 判定设定 If the test reading value is beyond the setting value, the
fail will be acting, otherwise the pass will proceed.
设定值范围，为测试档位的 5% ~ 100%
准确度 +15% 满刻度 (3A ~ 5A)；+10% 满刻度 (5A ~ 32A)
--------------------------------------------------------------------------------
REMOTE CONTROL 高电压输入 11V ~ 15V, 低电压 0 ~ 4V 及低电流输入 20mA 以下
--------------------------------------------------------------------------------
测试模式 正常模式： 当警告声响起，测试停止
连续模式：当警告声响起，测试仍持续进行
--------------------------------------------------------------------------------
蜂鸣器 当测试 fail 时，提供蜂鸣声
--------------------------------------------------------------------------------
测试频率 50Hz 或 60Hz independent 视电源电压而定
--------------------------------------------------------------------------------
输出信号 TEST, GO, NG, WARNING, READY, MONITOR
--------------------------------------------------------------------------------
使用电源 交流 100V/120V/220V/240V+10%, 50/60Hz
--------------------------------------------------------------------------------
附件 测试线 GHT-115 x 1, 操作手册 x 1, 电源线 x 1
--------------------------------------------------------------------------------
This instrument is designed to test Grounding continuity resistance of the
monitor, Switching power supplies, Power cord and Electronic appliances. |
售价：￥0