USB Explorer 280多功能USB 3.0协议分析仪

The USB Explorer 280 builds on a successful legacy of Ellisys USB analyzer and generator products, and delivers a superior design efficiency that includes an embedded 4GB of memory, configuration-flexible hardware, and a custom-made processor with the power needed to test and analyze the USB 3.0 5GT/s SuperSpeed mode. Each Ellisys USB Explorer 280 hardware unit is capable of acting as either a protocol analyzer or packet generator, depending on the configuration

• Supported specifications: USB 3.0, USB 2.0, and USB 1.x
• Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s
• Timestamp accuracy: 8ns for USB 3.0, and 16.7ns for USB 2.0/1.x
• Low-level error detection: CRC-5, CRC-16, CRC-32, state transition errors, invalid PID, framing errors, frame sequence errors, length errors
• Bus states: detection of SuperSpeed link operating states and all USB 2.0/1.x electrical bus state

• Supported specifications: USB 3.0, USB 2.0, and USB 1.x
• Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s
• Supported modes: host or device emulation
• Timing: 8ns for USB 3.0, and 16.7ns for USB 2.0/1.x

• 4 GBytes of FIFO Memory
• Data is stored in highly optimized format
• Analyzed data is uploaded in real time through a USB connection

• Link under test: USB 3.0 STD-A and STD-B
• 8 SMA (early configurations as alternative front-end connection for SuperSpeed)

• Computer interface: USB STD-B
• Auxiliary equipment: supports connection of extension boards
• SMA trigger: in and out, 50 Ω, max 5VDC
• Inter-equipment: in and out, supports connection of several units together
• Power: Max 25W